PERFORMANCE ASSESSMENT OF AN ARDUINO-CONTROLLED SOLAR- POWERED EVAPORATIVE COOLING SYSTEM FOR POST-HARVEST PRESERVATION OF TOMATOES AND HOT PEPPER IN SEMI-ARID NIGERIA

Authors

DOI:

https://doi.org/10.5281/zenodo.19686906

Keywords:

Solar-powered, Energy, operational efficiency, Colour degradation, physiological changes

Abstract

Post-harvest losses of fruits and vegetables remain a significant challenge in developing regions due to inadequate storage infrastructure and limited access to reliable energy. The present designed and developed an Arduino-controlled solar-powered evaporative cooling system for postharvest preservation of tomatoes and hot pepper under semi-arid conditions. The system integrates a natural jute fiber evaporative pad, a solar photovoltaic power supply, a water recirculation unit, and a microcontroller- based control mechanism to regulate the storage microclimate. Performance evaluation was conducted through no-load and load tests. Under no-load conditions, the system consistently reduced internal temperature while increasing relative humidity, reaching up to 98%, thereby establishing a stable cooling environment based on adiabatic evaporation. For the load test, 2 kg of tomatoes and 1 kg of hot pepper were stored inside the chamber and compared with equal quantities kept under ambient conditions. The system maintained high relative humidity levels (approximately 80–98%) and achieved moderate reductions in temperature relative to ambient conditions. Although cooling performance was influenced by ambient humidity, the system effectively minimized vapour pressure deficit, reducing moisture loss and slowing physiological deterioration of the produce. The findings demonstrate that the system having Saturation efficiency (SE) of 95% offers a low-cost, energy-efficient and sustainable approach for postharvest storage. Its capacity to maintain high humidity and moderate temperature conditions supports extended shelf life of perishable produce in environments where conventional Energy is not readily available but has abundant Solar energy.

Downloads

Download data is not yet available.

Author Biographies

  • Maina, M. B., University of Maiduguri
    Department of Mechanical Engineering
  • Musa, H., University of Maiduguri
    Department of Mechanical Engineering
  • Muhammad, A. B., University of Maiduguri
    Department of Mechanical Engineering
  • Abdulrahim, A. T., University of Maiduguri
    Department of Mechanical Engineering

References

Affognon, H., Mutungi, C., Sanginga, P., & Borgemeister, C. (2015). Unpacking postharvest losses in sub-Saharan Africa: A meta- analysis. World Development, 66, 49–68. https://doi.org/10.1016/j.worldde v.2014.08.002

Alemu, A. (2022). Performance evaluation of evaporative cooling technologies for postharvest preservation of horticultural crops. Journal of Food

Processing and Preservation, 46(5), e16512. https://doi.org/10.1111/jfpp.16512

Alemu, A. (2022). Performance evaluation of evaporative cooling systems for storage of fruits and vegetables. Journal of Food

Engineering, 320, 110921. https://doi.org/10.1016/j.jfoodeng.2021.110921

Arah, I. K., Ahorbo, G. K., Anku, E. K., Kumah, E. K., & Amaglo, H. (2020). Postharvest handling practices and treatment methods

for tomato handlers in developing countries: A review. Advances in Agriculture, 2020, 1–8. https://doi.org/10.1155/2020/8870423

Basediya, A. L., Samuel, D. V. K., & Beera, V. (2013). Evaporative cooling system for storage of fruits and vegetables: A review. Journal of Food Science and Technology, 50(3), 429–442. https://doi.org/10.1007/s13197- 011-0311-6

Elik, A., Yanık, D. K., Istanbullu, Y., Güzelsoy, N. A., Yavuz, A., & Göğüş, F. (2019). Strategies to reduce post-harvest losses for fruits and vegetables. International Journal of Scientific and Technological Research, 5(3), 29–39. Engineering Principles, Modeling and Economics of Evaporative

Coolers. Eds: Daniel Ingo Hefft, Charles Oluwaseun Adetunji, ... Duncan Onyango Mbuge (2023) Academic Press ISBN: 978-0-323-90039-3 DOI: 10.1016/C2020-0-03271-8 Pp. 95-102

Food and Agriculture Organization. (2019). The state of food and agriculture

2019: Moving forward on food loss and waste reduction. FAO. Jain, D., & Tiwari, G. N. (2020). Modeling and experimental validation of evaporative cooling systems for hot and dry climates. Renewable Energy, 145, 1935–1946. https://doi.org/10.1016/j.renene.2019.07.125

Kitinoja, L. (2018). Innovations in postharvest technology for developing countries. Stewart Postharvest Review, 14(2), 1–13. Kitinoja, L. (2018). Use of cold chains for reducing food losses in developing countries. Postharvest Biology and Technology, 130, 82–94. https://doi.org/10.1016/j.postharvbio.2017.12.013

Odesola, I. F., & Onyebuchi, V. N. (2009). A review of evaporative cooling technology for food preservation. International Journal of Engineering and Technology, 1(5), 225–231. Odesola, I. F., & Onyebuchi, O. (2009). A review of porous evaporative cooling for the preservation of fruits and vegetables. Pacific

Journal of Science and Technology, 10(2), 935–941.

Twum-Dei B, Lutterodt HE, Annan RA and Aduku LNE. (2025) Study protocol: post-harvest losses of fruits and vegetables and their relationship with the nutritional status of women and children. Front Public Health. Sep 18;13:1654786. doi: 10.3389/fpubh.2025.1654786. PMID: 41048279; PMCID:

PMC12490541.

Zhao, Y., Zhang, L., & Wang, S. (2020). Experimental investigation of evaporative cooling performance under hot and dry climatic conditions. Energy and Buildings, 215, 109870. https://doi.org/10.1016/j.enbui ld.2020.109870

Downloads

Published

2026-03-05

How to Cite

Maina, M. B., Musa, H., Muhammad, A. B., & Abdulrahim, A. T. (2026). PERFORMANCE ASSESSMENT OF AN ARDUINO-CONTROLLED SOLAR- POWERED EVAPORATIVE COOLING SYSTEM FOR POST-HARVEST PRESERVATION OF TOMATOES AND HOT PEPPER IN SEMI-ARID NIGERIA. International Journal of Renewable Energy and Environment, 4(1), 478-487. https://doi.org/10.5281/zenodo.19686906

Similar Articles

1-10 of 35

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)